1
3
2
1
1
3
Ford Focus / Focus C-MAX / Focus CC
39
40
41
1
2
42
Fastening for Underride Protection
Vehicle-dependent, if present!
1 M6x25 bolt in existing 7 mm dia. hole
3 10 mm shim
2 Pin lock
Installing heater unit
Only for 1.4 liter; 1.6 liter; 1.8 liter engine
Guide heater unit to installation location and
connect wiring harness as shown.
Use holes in bracket as shown.
Check position of all components and adjust
if necessary. Check that they have free
clearance.
1 M10x30 bolt with locking toothing [2x]
Use hole in strut as shown.
Check position of all components and adjust
if necessary. Check that they have free
clearance.
1 M8 flanged nut (premounted)
3 Flanged nut
2 Strut
Tighten Ejot screw (10 Nm).
Premount-
ing heater
unit
Installing
heater unit
Installing
heater unit
Installing
heater unit
22