Using The Recovery Cds; Reinstalling Software Or Driver - BenQ Joybook 2100 Series User Manual

Using the Recovery CDs

• All programs you installed or data you saved on drive C: will be erased. However,
data on drive D: will not be affected.
• Recover using the Recovery CDs will cause the Quick Recovery function to
become unavailable. If this happens, please contact your local BenQ service cen-
ter for help. Besides, you will also need to install the device drivers manually from
Recovery CD Disc 2.
• Do not remove the Recovery CD when recovery is in progress.
• Make sure that the system is not in hibernation mode before using the Recovery
CDs.
1. Restart your Joybook.
2. When Joybook starts up, press the F F 9 key to enter the Boot Menu during Power-
On Self-Test (POST) while the BenQ Joybook logo is being displayed.
3. Insert the Recovery CD Disc 1 into the CD-ROM drive.
4. Select C C D-ROM/DVD from Boot Menu using the up and down arrow keys ( ,
) and press the E E nter key.
5. Then system will boot from the Recovery CD and you will see the Quick Restore
screen. Follow the on-screen instructions to proceed.
6. When you finish the recovery process, remember to remove the Recovery CD.

Reinstalling Software or Driver

To install/reinstall the software or driver, you can find the source files on the
Recovery CD Disc 2.
Recovering Your System 35