Table of Contents
Advertisement
7.4 SNMP
SNMP (Simple Network Management Protocol) is only useful if you have a SNMP
program on your PC. To reach this screen, select SNMP in the Management section
of the menu.
Data - SNMP Screen
General
Enable SNMP
Community
Access Rights
Managers
Any Station
Only this station
Traps
Disable
Broadcast
Use this to enable or disable SNMP as required
Enter the community string, usually either "Public" or "Private".
Select the desired option:
•
Read-only - Data can be read, but not changed.
•
Read/Write - Data can be read, and setting changed.
The IP address of the manager station is not checked.
The IP address is checked, and must match the address you
enter in the IP address field provided.
If selected, you must enter the IP address of the required
station.
Traps are not used.
Select this to have Traps broadcast on your network. This
makes them available to any PC.
43
Advertisement
Table of Contents
