Planet WNAP-7350 User Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Wireless Access Point
  5. WNAP-7350
  6. User manual

Planet WNAP-7350 User Manual

802.11a/n wireless outdoor ap
Hide thumbs Also See for WNAP-7350:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
User's Manual
802.11a/n Wireless Outdoor AP
WNAP-7350
www.PLANET.com.tw

Advertisement

Table of Contents
loading

Related Manuals for Planet WNAP-7350

Summary of Contents for Planet WNAP-7350

  • Page 1 User’s Manual 802.11a/n Wireless Outdoor AP WNAP-7350 www.PLANET.com.tw...
  • Page 2 Copyright Copyright  2013 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
  • Page 3 CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Energy Saving Note of the Device This power required device does not support Standby mode operation. For energy saving, please remove the DC-plug to disconnect the device from the power circuit.
  • Page 4 Revision User’s Manual for PLANET 802.11a/n Wireless Outdoor Access Point Model: WNAP-7350 Rev: 3.0 (August, 2013) Part No. EM-WNAP-7350_v3.0 (2081-E10510-003)

  • Page 5: Table Of Contents

    CONTENTS Chapter 1. Product Introduction......................1 Package Contents ....................... 1 Product Description......................2 Product Features......................... 6 Product Specification ......................7 Chapter 2. Hardware Installation ......................10 Hardware Description .......................10 2.1.1 The Bottom Panel ....................10 Chapter 3. Connecting to the AP ......................12 Preparation before Installation ..................12 3.1.1 Professional Installation Required ................12...
  • Page 6 5.3.3.4. Client Bridge (Slave AP Bridge) ..................42 5.3.4 Advanced – System Log..................43 5.3.5 Advanced – Tools ....................43 5.3.5.1. Ping..........................44 5.3.5.2. Traceroute........................44 5.3.5.3. Throughput........................45 Firewall Settings........................45 5.4.1 MAC/IP/Port Filtering ....................45 5.4.2 Virtual Server ......................47 5.4.3 DMZ ........................48 5.4.4 Firewall........................48 5.4.5...
  • Page 7 A.32 What is Modulation Coding Scheme (MCS)?..............86 A.33 What is Frame Aggregation? ....................86 A.34 What is Guard Intervals (GI)? ...................87 Appendix B: Configuring the PC in Windows 7 ................88 Appendix C: Use Planet Smart Discovery to find AP ..............91 Appendix D: Specifications........................92...

  • Page 8: Chapter 1. Product Introduction

    User Manual of WNAP-7350 Chapter 1. Product Introduction 1.1 Package Contents Thank you for choosing PLANET WNAP-7350. Before installing the AP, please verify the contents inside the package box. WNAP-7350 Wireless AP Quick Installation Guide CD-ROM (User Manual included) PoE Injector & Power Cord...

  • Page 9: Product Description

    WNAP-7350 is able to give stable and efficient wireless performance for long distance application. Adopting the IEEE 802.11n standard and 2T2R MIMO technology, the WNAP-7350 is able to deliver six times faster data rate up to 300Mbps than the normal 802.11a wireless device. It also features adjustable output power up to 500mW to extend broader coverage in outdoor long range application.
  • Page 10 LAN. It helps users to easily build a wireless network and extend the wireless range of existing wireless network. The WNAP-7350 also supports WISP mode, so CPE users can easily connect to Internet via WISP provider or connect to a wired network.
  • Page 11 WNAP-7350 can perform normally under rigorous weather conditions including heavy rain, wind and snow. Moreover, the WNAP-7350 is rated to operate at the temperature from -30 to 75 degree C; thus, it can operate more stably than general outdoor equipment. It is the best way to use the WNAP-7350 to build outdoor wireless access applications between buildings on campuses, business, rural areas and more.
  • Page 12 User Manual of WNAP-7350 Easy Installation & Management With user-friendly Web UI and step by step Setup Wizard, the WNAP-7350 is easy to install, even for users who never experience setting up a wireless network. Furthermore, with SNMP-based management interface,...

  • Page 13: Product Features

    User Manual of WNAP-7350 1.3 Product Features  Industrial Compliant Wireless LAN & LAN  Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate  Backward compatible with 802.11a standard  Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/ MDI-X supported Fixed-network Broadband Router ...

  • Page 14: Product Specification

    User Manual of WNAP-7350 1.4 Product Specifications WNAP-7350 Product 5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point Hardware Specifications IEEE 802.11a/n Wireless LAN IEEE 802.11i Wireless Security IEEE 802.3 10Base-T Ethernet Standard support IEEE 802.3u 100Base-TX Ethernet IEEE 802.3x Flow Control IEEE 802.3af/at Power over Ethernet / PD...
  • Page 15 User Manual of WNAP-7350 IEEE 802.11a: -91dBm Receiver Sensitivity IEEE 802.11n: -92dBm Output Power Control 3~27dBm Software Features Built-in DHCP server supporting static IP address distributing Supports 802.1d STP (Spanning Tree)  Static IP  Dynamic IP  PPPoE  PPTP ...
  • Page 16 User Manual of WNAP-7350 Dimension (W x D x H) 239 x 269 x 80mm Weight 2.4kg Installation Pole mounting or Wall mounting AP: IEEE 802.3af/at PoE / 48VDC input (PoE Injector included) Power Requirements PoE Injector: 100~240VAC Power Consumption 7.68W...

  • Page 17: Chapter 2. Hardware Installation

    User Manual of WNAP-7350 Chapter 2. Hardware Installation Please follow the instructions below to connect WNAP-7350 to the existing network devices and your computers. 2.1 Hardware Description  Dimensions: 320 x 27.5 x 320 mm (W x D x H) Figure 2-1 Three-way View 2.1.1 The Bottom Panel...
  • Page 18 User Manual of WNAP-7350 Bottom Panel Figure 2-2 Bottom Panel Interface Description 10/100Mbps RJ-45 port , Auto MDI/ MDI-X & 802.3af/at PoE supported Connect LAN port to the PoE injector or PoE switch to power on the (802.3af/at PoE/PD port) device.

  • Page 19: Chapter 3. Connecting To The Ap

    To keep you safe and install the hardware properly, please read and follow these safety precautions. If you are installing WNAP-7350 for the first time, for your safety as well as others’, please seek assistance from a professional installer who has received safety training on the hazards involved.
  • Page 20 User Manual of WNAP-7350 OUTDOOR INSTALLATION WARNING IMPORTANT SAFETY PRECAUTIONS: LIVES MAY BE AT RISK! Carefully observe these instructions and any special instructions that are included with the equipment you are installing. CONTACTING POWER LINES CAN BE LETHAL. Make sure no power lines are anywhere where possible contact can be made.

  • Page 21: Installing The Ap

    Please install the AP according to the following steps. Don't forget to pull out the power plug and keep your hands dry. Step 1. Plug the N-Type (M) to N-Type (M) RF cables into the antenna connectors of the WNAP-7350, and then connect the N-Type (F) antennas to the other side of the RF cables.
  • Page 22 User Manual of WNAP-7350 Step 4. Plug the other waterproof kit to the WAN/LAN port to complete the installation. Figure 3-4 Step 4a. Pole Mounting: (a.1) Attach the mounting bracket to the back of the device by using four screws and flat washers.
  • Page 23 User Manual of WNAP-7350 Step 4b. Wall Mounting: (b.1) Attach the mounting bracket to the back of the device by using four screws and flat washers. (b.2) Assemble the M bracket on the wall by using four screws and flat washers.

  • Page 24: Chapter 4. Quick Installation Guide

    Connect the WNAP-7350 with your PC by an Ethernet cable plugging in the LAN port of the PoE injector on one side and in the LAN port of the PC on the other side. Please power on the WNAP-7350 by PoE from PoE injector or PoE switch.
  • Page 25 User Manual of WNAP-7350 Figure 4-1 Now click OK to save your settings. Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the AP. The following example is in Windows XP OS. Please follow the steps below: Click on Start >...
  • Page 26 User Manual of WNAP-7350 Figure 4-2 In the run box type “cmd” and click OK. (Windows Vista users type “cmd” in the Start .Search box.)At the prompt. Figure 4-3 Open a command prompt, and type ping 192.168.1.1, and then press Enter.
  • Page 27 User Manual of WNAP-7350 Figure 4-4 Success result of Ping command If the result displayed is similar to Figure 4-5, it means the connection between your PC and the AP has failed. Figure 4-5 Failure result of Ping command If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some firewall software programs may block a DHCP request on newly installed adapters.

  • Page 28: Starting Setup In The Web Ui

    User Manual of WNAP-7350 4.2 Starting Setup in the Web UI It is easy to configure and manage the WNAP-7350 with the web browser. Step 1. To access the configuration page, open a web-browser and enter the default IP address http://192.168.1.1...
  • Page 29 After entering the username and password, the Status page screen appears as Figure 4-8 Figure 4-8 WNAP-7350 Web UI Screenshot Step 2. Go to “Easy Setup” to choose an Operation Mode. Please refer to the instructions in the next chapter for configuring the other Operation Modes.

  • Page 30: Chapter 5. Configuring The Ap

    Easy Setup, and Advanced) below, allowing you to manage the AP with ease. Figure 5-1 5.1 Status On this page, you can view information about the current running status of WNAP-7350, including WAN interface, LAN interface, wireless interface, and firmware version information. Status ...
  • Page 31 User Manual of WNAP-7350 Object Description Internet Configuration  Connected Type Displays current Internet connection type.  Disconnected: Indicates that the Ethernet cable from your ISP side is / is not correctly connected to the WAN port on the AP or the AP is not logically connected to your ISP.

  • Page 32: Dhcp Clients

    User Manual of WNAP-7350 Figure 5-1-2 Object Description Memory  Memory Left/ Displays the retain memory and total memory. Memory Total WAN/LAN  WAN Rx packets Displays the real-time packets received from WAN port.  WAN Rx bytes Displays the real-time bytes received from WAN port.

  • Page 33: Easy Setup

    User Manual of WNAP-7350 Figure 5-1-3 Object Description  MAC address Displays MAC address of a given host. Displays IP address(es) that client(s) obtained from the DHCP  IP Address server.  Expires in Remaining time for a corresponding IP address lease.

  • Page 34: Advanced

    User Manual of WNAP-7350 5.3 Advanced “Advanced” includes the following four submenus (Advanced, Firewall Settings, Network Settings, and Wireless Settings). Clicking any of them enters corresponding interface for configuration. Below explains, in details, each such feature. Figure 5-3-1 5.3.1 Advanced - Management This section allows you to manage the Wireless AP.

  • Page 35: Web Interface Settings (Password)

    User Manual of WNAP-7350 5.3.1.1. Web Interface Settings (Password) Figure 5-3-2 Object Description  User Name Display the User Name info.  Password Enter the new password that you prefer for login.  Re-enter to confirm Re-enter the new password to confirm.

  • Page 36: Configuration

    User Manual of WNAP-7350 Click the “Browse…” button to select the new firmware for upgrading. Object Description  Software Version Display the current Software Version info.  Location Click the “Browse…” button to select the new firmware in this field.

  • Page 37: Load Factory Defaults

    User Manual of WNAP-7350 5.3.1.4. Load Factory Defaults Figure 5-3-5 Click the “Load Default” button to reset it to factory default settings. 5.3.1.5. Reboot System Figure 5-3-6 Click the “Reboot Now!” button to restart the Wireless AP. -30-...

  • Page 38: Scheduling Reboot

    User Manual of WNAP-7350 5.3.1.6. Scheduling Reboot Figure 5-3-7 Select “Enable” to configure the system auto reboot according to the Duration Time (Time interval). Object Description Enable: select it to enable the Scheduling Reboot.  Enable Scheduling Reboot Disable: select it to disable the Scheduling Reboot.

  • Page 39: Time Zone Settings

    User Manual of WNAP-7350 5.3.2.1. Time Zone Settings Figure 5-3-8 The page includes the following fields: Object Description  Current Time Display the current time.  Sync with host Click it to sync your PC’s time to the device.  Time Zone Select your current time zone.
  • Page 40 Planet DDNS account. Please refer to the FAQ (http://www.planetddns.com/index.php/faq) for how to register a free account. Please refer to the procedure listed as follows to configure using Planet DDNS service. Step 1. Select “planetddns.com” to choose Planet DDNS service.

  • Page 41: Upnp Settings

    Please remember to enter the remote management port number that you have configured in Step 3. Figure 5-3-13 You can go to My Devices page of Planet DDNS website to check if the “Last Connection IP” is displayed. This indicates your DDNS service is working properly. Figure 5-3-14 5.3.2.3.

  • Page 42: Snmp Settings

    User Manual of WNAP-7350 Figure 5-3-15 In the computer connected with the WNAP-7350, go to “Network” to check whether the WNAP-7350 is displayed on the list. Double-click it to logon the Web UI of the WNAP-7350. Figure 5-3-16 5.3.2.4. SNMP Settings Enabling SNMP function will allow the network management station to retrieve statistics and status from the SNMP Agent in the device.

  • Page 43: Advanced - Operation Mode

    5.3.3.1. AP Router (AP+Router) In the Access Point Mode with Router Function, the WNAP-7350 acts as a central connection point, which wireless clients can connect to. The DHCP & NAT is enabled, so the clients are wirelessly connected to the WNAP-7350 that can share the internet connection by connecting the WNAP-7350 to a DSL/cable modem.

  • Page 44: Ap Bridge (Ap+Wds)

    User Manual of WNAP-7350 1. Connect the LAN port of the WNAP-7350 to the POE port of the PoE Injector over an Ethernet cable. 2. Connect the DSL/cable modem to the WAN port of the WNAP-7350. 3. Plug one end of the power cord into the PoE Injector, and the other end in electrical socket.

  • Page 45: Client Router (Wisp)

    Clients Switch 1. Connect the LAN port of the WNAP-7350 to the POE port of the PoE Injector over an Ethernet cable. 2. Connect the PC to the LAN port of the PoE Injector over an Ethernet cable. 3. Plug one end of the power cord into the PoE Injector, and the other end in electrical socket.
  • Page 46 User Manual of WNAP-7350 1. Connect the LAN port of WNAP-7350 to the POE port of the PoE Injector over an Ethernet cable. 2. Connect the PC to the LAN port of the PoE Injector over an Ethernet cable. 3. Plug one end of the power cord into the PoE Injector, and the other end in electrical socket.
  • Page 47 User Manual of WNAP-7350 Figure 5-3-22 Step 4. Enter the Passphrase, and then click “Add” to add this setting to the profile. Figure 5-3-23 Step 5. The profile should be listed on the Profile List as the figure is shown below.
  • Page 48 User Manual of WNAP-7350 Figure 5-3-24 Step 6. Go to “Advanced-> Network Settings-> LAN” to enable DHCP Server. Figure 5-3-25 Step 7. Go to “Advanced-> Network Settings-> WAN” to configure the WAN Connection. Figure 5-3-26 -41-...

  • Page 49: Client Bridge (Slave Ap Bridge)

    SSID and Security Password to associate with it. 1. Connect the LAN port of WNAP-7350 to the POE port of the PoE Injector over an Ethernet cable. 2. Connect the PC to the LAN port of the PoE Injector over an Ethernet cable.

  • Page 50: Advanced - System Log

    User Manual of WNAP-7350 Figure 5-3-28 To configure the Wireless Settings of Client Bridge Mode, please refer to the section 5.6 Wireless Settings. 5.3.4 Advanced – System Log Choose menu “Advanced-> System Log” to view the logs of the Wireless AP.

  • Page 51: Ping

    User Manual of WNAP-7350 5.3.5.1. Ping Ping is a network tool used to test whether a particular host is reachable across an IP network. Enter the IP, Ping Count, and click “Start” to diagnostic your internet connection. Figure 5-3-30 5.3.5.2.

  • Page 52: Throughput

    User Manual of WNAP-7350 5.3.5.3. Throughput Click “VISIT THE SITE TO TEST SPEED” button to go to http://www.speedtest.net/ to test the Internet connection speed. Figure 5-3-32 5.4 Firewall Settings 5.4.1 MAC/IP/Port Filtering -45-...
  • Page 53 User Manual of WNAP-7350 Figure 5-4-1 The page includes the following fields: Object Description  MAC/IP/Port Filtering Select Enable to enable the MAC/IP/Port Filtering function.  Default Policy Select a policy for filtering rule. Fill in the MAC address of source NIC, to restrict data ...

  • Page 54: Virtual Server

    User Manual of WNAP-7350 5.4.2 Virtual Server Figure 5-4-2 The page includes the following fields: Object Description  Virtual Server Select Enable to enable the Virtual Server function. To forward data packets coming from WAN to a specific IP  IP address address that hosted in local network behind the NAT firewall, fill in the IP address.

  • Page 55: Dmz

    User Manual of WNAP-7350 The protocol used for this application, either TCP, UDP, or  Protocol TCP&UDP (all protocols are supported by the Device.).  Comment Make a comment to help identify the setting. 5.4.3 DMZ Figure 5-4-3 The page includes the following fields:...

  • Page 56: Qos

    User Manual of WNAP-7350 Figure 5-4-4 The page includes the following fields: Object Description  Remote Management Select Deny or Allow for remote management function. (via WAN)  Remote Management Configure the port for remote management. Port  Ping from WAN Filter Select Deny or Allow for Ping permit from WAN.
  • Page 57 User Manual of WNAP-7350 Figure 5-4-5 The page includes the following fields: Object Description  QoS Setup Select Enable to enable the QoS function. Set the limit of total upload bandwidth in kbits. To disable  Upload Bandwidth upload bandwidth limitation, input ‘0’ here.

  • Page 58: Content Filtering

    User Manual of WNAP-7350 define a single IP address. Specify the remote (destination) IP address that will be affected by this rule. Please input the starting IP address in the left field,  Destination IP and input the end IP address in the right field to define a range of IP addresses, or just input the IP address in the left field to define a single IP address.

  • Page 59: Web Host Filter Settings

    User Manual of WNAP-7350 Figure 5-4-6 5.4.6.2. Web Host Filter Settings The Web Host Filter option allows you to set up a list of keywords you would like to deny through your network. Please enter a Host (keyword) for filtering.

  • Page 60: Static (Fixed Ip)

    User Manual of WNAP-7350 5.5.1.1. Static (Fixed IP) If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static (Fixed IP). The Static IP settings page will appear as the figure is shown below.

  • Page 61: Pppoe (Adsl)

    User Manual of WNAP-7350 Figure 5-5-2 The page includes the following fields: Object Description  WAN Connections Select Cable/Dynamic IP (DHCP) from the list.  Host Name This option specifies the Host Name of the AP Router. (Optional) Enter the DNS IP address in dotted-decimal notation ...

  • Page 62: Ipsec

    User Manual of WNAP-7350 Figure 5-5-3 The page includes the following fields: Object Description  WAN Connections Select PPPoE (ADSL) from the list.  Host Name This option specifies the Host Name of the AP Router. Enter the User Name and Password provided by your ISP.
  • Page 63 User Manual of WNAP-7350 Figure 5-5-4 Figure 5-5-5 The page includes the following fields: Object Description  WAN Connections Select IPSEC from the list. (Optional) Enter the DNS IP address in dotted-decimal notation provided  Primary DNS Server by your ISP.
  • Page 64 User Manual of WNAP-7350 For an IPSec connection, all host addresses must be of the same  Connection address family Address Family (IPv4 and IPv6 use different Address Families).  IPSec Operation Mode Select the IPSec Operation mode from the drop-down list.
  • Page 65 User Manual of WNAP-7350 Group 2 1024 bits MODP group RFC 2409 Group 3 EC2N group on GP(2^155) RFC 2409 Group 4 EC2N group on GP(2^185) RFC 2409 Group 5 1536 bits MODP group RFC 3526  IPSec Authentication The AP supports SHA1 & MD5 authentication algorithms.

  • Page 66: Pptp

    User Manual of WNAP-7350 Lifetime settings determine when a new key is generated. Any time a key lifetime is reached, the associated SA is also renegotiated. The process of generating new keys at intervals is called dynamic rekeying or key ...

  • Page 67: L2Tp

    User Manual of WNAP-7350  Server IP Enter the IP address of the PPTP server. Enter the User Name and Password provided by your ISP.  User Name / Password These fields are case-sensitive. Static IP/ Dynamic IP: Choose either as you are given by your ISP and If you choose static IP and enter the domain name, ...

  • Page 68: Lan

    User Manual of WNAP-7350  Server IP Enter the IP address of the L2TP server. Enter the User Name and Password provided by your ISP.  User Name / Password These fields are case-sensitive. Static IP/ Dynamic IP: Choose either as you are given by your ISP and If you choose static IP and enter the domain name, ...

  • Page 69: Dhcp Server

    User Manual of WNAP-7350  Subnet Mask Enter the subnet mask of the LAN IP. 5.5.2.1. DHCP Server Figure 5-5-9 The page includes the following fields: Object Description  DHCP Server Select DHCP Server to enable DHCP server feature.  Local Domain Name (Optional) Input the domain name of your network.

  • Page 70: Vlan

    User Manual of WNAP-7350 between clients and servers. Configure the IP address of DHCP Relay host. 5.5.3 VLAN Figure 5-5-11 The page includes the following fields: Object Description  VLAN Setup Check this box to enable the VLAN function.  Management VLAN ID Configure a specified VLAN to be the management VLAN.

  • Page 71: Advanced Routing

    User Manual of WNAP-7350 IEEE 802.1Q VLAN Tag, whose VLAN ID is just the ID of the VLAN where the sender belongs. 5.5.4 Advanced Routing Figure 5-5-12 The page includes the following fields: Object Description  Destination The IP address of packets that can be routed.

  • Page 72: Ipv6

    User Manual of WNAP-7350  Comment Help identify the routing Enable or disable the RIP (Routing Information Protocol) for the  Dynamic Routing WAN or LAN interface. Protocol It supports RIP v1 and v2. 5.5.5 IPv6 Use this section to configure your IPv6 Connection type. If you are unsure of your connection method, please contact your Internet Service Provider.

  • Page 73: Wireless Settings

    User Manual of WNAP-7350 Setting Internet Service Provider (ISP). Use this section to configure the internal network settings of your  LAN IPv6 Address AP/Router. If you change the LAN IPv6 Address here, you may need Setting to adjust your PC network settings to access the network again.

  • Page 74: Wireless Mode - Access Point

    User Manual of WNAP-7350 5.6.1.1. Wireless Mode – Access Point Figure 5-6-1 The page includes the following fields: Object Description Click to select Wireless Mode from pull down menu. There are 4 options available: Access Point:  This mode allows wireless clients or Stations(STA) to access WDS Access Point: ...
  • Page 75 It is the wireless network name. The SSID can be 32 bytes long.  Network Name (SSID) User can use the default SSID or change it. The default SSID is WNAP-7350.  WPS Choice Enable it to use WPS associating with AP or Client device.

  • Page 76: Wireless Mode - Wds Access Point

    User Manual of WNAP-7350 5.6.1.2. Wireless Mode – WDS Access Point Figure 5-6-2 The page includes the following fields: Object Description Click to select Wireless Mode from pull down menu. There are 4 options available: Access Point: This mode allows wireless clients or Stations(STA) to access...
  • Page 77 It is the wireless network name. The SSID can be 32 bytes long.  Network Name (SSID) User can use the default SSID or change it. The default SSID is WNAP-7350.  Encryption Settings Select the encryption type that you would like to use.

  • Page 78: Wireless Mode - Wds Repeater

    User Manual of WNAP-7350 5.6.1.3. Wireless Mode – WDS Repeater Figure 5-6-3 The page includes the following fields: Object Description Click to select Wireless Mode from pull down menu. There are 4 options available: Access Point: This mode allows wireless clients or Stations(STA) to access...
  • Page 79  Network Name (SSID) User can use the default SSID or change it. The default SSID is WNAP-7350. It is the wireless network name of Root AP.  Root AP SSID The SSID must be the same with Root AP so that the connection can be established successfully.

  • Page 80: Wireless Mode - Wds Client

    User Manual of WNAP-7350 5.6.1.4. Wireless Mode – WDS Client Figure 5-6-4 The page includes the following fields: Object Description Click to select Wireless Mode from pull down menu. There are 4 options available: Access Point: This mode allows wireless clients or Stations(STA) to access...
  • Page 81 User Manual of WNAP-7350 Select the operating channel width to WiFi 11na (mixed), HT20 or  Network Mode HT40MHz. An extension channel is a secondary channel used to bond with the  Extension Channel primary channel to increase this range to 40MHz. Bonded channels allow for greater bandwidth on the local network.

  • Page 82: Profile Settings

    User Manual of WNAP-7350 5.6.2 Profile Settings In Client Bridge and Client Router operation modes, please go to “Advanced-> Wireless Settings-> Profile Settings” to configure the wireless client function to connect with the wireless AP. Figure 5-6-5 The page includes the following fields:...
  • Page 83 User Manual of WNAP-7350  BSSID (optional) Indicate the Basic Service Set ID of the associated AP  Encryption Settings Select the encryption type that you would like to use. To decrease the chances of data retransmission at long distance, the ...

  • Page 84: Advanced

    User Manual of WNAP-7350 5.6.3 Advanced Figure 5-6-6 The page includes the following fields: Object Description  Wireless On/Off Click this button to switch the Wireless Radio On or Off.  AP MAC Address Display the AP MAC Address of wireless interface.

  • Page 85: Access Control

    User Manual of WNAP-7350 milliseconds. The default value is 100. This value determines the interval of the Delivery Traffic Indication Message (DTIM). You can specify the value between 1-255  DTIM Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval.

  • Page 86: Logout

    User Manual of WNAP-7350 Figure 5-6-7 The page includes the following fields: Object Description Select the SSID which you would like to configure access  SSID control. Allow Listed: allow the packets not specified by any access control policy to pass through the AP Router.

  • Page 87: Appendix A: Faq

    User Manual of WNAP-7350 Appendix A: FAQ A.1 What and how to find my PC’s IP and MAC address? IP address is the identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination. The format of an IP address is a 32-bit numeric address written as four numbers separated by periods.

  • Page 88: What Is Bssid

    User Manual of WNAP-7350 Example 1: wireless Infrastructure Mode Ad hoc mode (also called peer-to-peer mode or an Independent Basic Service Set, or IBSS) is simply a set of 802.11 wireless stations that communicate directly with one another without using an access point or any connection to a wired network.

  • Page 89: What Are The Open System And Shared Key Authentications

    User Manual of WNAP-7350 Solutions to overcome the interferences:  Minimizing the number of walls and ceilings.  Position the WLAN antenna for best reception.  Keep WLAN devices away from other electrical devices, eg: microwaves, monitors, electric motors…etc. ...

  • Page 90: What Is Rts (Request To Send) Threshold

    User Manual of WNAP-7350 want to try lowering your fragmentation threshold. This will cause packets to be broken into smaller fragments. These small fragments, if corrupted, can be resent faster than a larger fragment. Fragmentation increases overhead, so you'll want to keep this value as close to the maximum value as possible.

  • Page 91: What Is Wi-Fi Protected Access (Wpa)

    User Manual of WNAP-7350 run that way to enhance network security. However it's no replacement for WEP, MAC filtering or other protections. A.15 What is Wi-Fi Protected Access (WPA)? Wi-Fi’s original security mechanism, Wired Equivalent Privacy (WEP), has been viewed as insufficient for securing confidential business communications.

  • Page 92: What Is Inter-Access Point Protocol (Iapp)

    User Manual of WNAP-7350 A.20 What is Inter-Access Point Protocol (IAPP)? The IEEE 802.11f Inter-Access Point Protocol (IAPP) supports Access Point Vendor interoperability, enabling roaming of 802.11 Stations within IP subnet. IAPP defines messages and data to be exchanged between Access Points and between the IAPP and high layer management entities to support roaming.

  • Page 93: What Is Vpn

    User Manual of WNAP-7350 A.27 What is VPN? VPN is the abbreviation of Virtual Private Network. It is designed for creating point-to point private link via shared or public network. A.28 What is IPSEC? IPSEC is the abbreviation of IP Security. It is used to transferring data securely under VPN.

  • Page 94: What Is Guard Intervals (Gi)

    User Manual of WNAP-7350 A.34 What is Guard Intervals (GI)? A GI is a period of time between symbol transmission that allows reflections (from multipath) from the previous data transmission to settle before transmitting a new symbol. The 802.11n specifies two guard intervals: 400ns (short) and 800ns (long).

  • Page 95: Appendix B: Configuring The Pc In Windows 7

    User Manual of WNAP-7350 Appendix B: Configuring the PC in Windows 7 In this section, we’ll introduce how to configure the TCP/IP correctly in Windows 7. First make sure your Network Adapter is working; refer to the adapter’s manual if needed.
  • Page 96 User Manual of WNAP-7350 Figure B-2 On the prompt page shown below, double click on the Internet Protocol Version 4 (TCP/IPv4). Figure B-3 -89-...
  • Page 97 User Manual of WNAP-7350 The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you can configure the TCP/IP protocol below:  Setting IP address manually Select Use the following IP address radio button.

  • Page 98: Appendix C: Use Planet Smart Discovery To Find Ap

    Step 3: Click “Refresh” button to update the current connected devices list; the screen is shown as follows: Figure C-1 Step 3: Select the WNAP-7350 from the list, and then click “Connect to Device” button to login the Web Management Configuration Page.

  • Page 99: Appendix D: Specifications

    User Manual of WNAP-7350 Appendix D: Specifications WNAP-7350 Product 5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point Hardware Specifications IEEE 802.11a/n Wireless LAN IEEE 802.11i Wireless Security IEEE 802.3 10Base-T Ethernet Standard support IEEE 802.3u 100Base-TX Ethernet IEEE 802.3x Flow Control IEEE 802.3af/at Power over Ethernet / PD...
  • Page 100 User Manual of WNAP-7350 IEEE 802.11n: 24 ± 1dBm IEEE 802.11a: -91dBm Receiver Sensitivity IEEE 802.11n: -92dBm Output Power Control 3~27dBm Software Features Built-in DHCP server supporting static IP address distributing Supports 802.1d STP (Spanning Tree)  Static IP  Dynamic IP ...
  • Page 101 User Manual of WNAP-7350 Material Aluminum Dimensions (W x D x H) 239 x 269 x 80mm Weight 2.4kg Installation Pole mounting or Wall mounting AP: IEEE 802.3af/at PoE / 48VDC input (PoE Injector included) Power Requirements PoE Injector: 100~240VAC Power Consumption 7.68W...
  • Page 102 WNAP-7350 *Model Number * Produced by: Manufacturer’s Name : Planet Technology Corp. Manufacturer’s Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) is herewith confirmed to comply with the requirements set out in the Council Directive on the 1999/5/EC R&TTE.
  • Page 103 AP/RouterΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ disposições da Directiva 1999/5/CE. ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ Por medio de la presente, PLANET Technology Výrobca PLANET Technology Corporation, týmto Español Slovensky Corporation, declara que 300Mbps 802.11a/n deklaruje, že táto 300Mbps 802.11a/n Wireless...

Table of Contents