Sony DMX-R100 Quick Reference page 62

Cue List Operation
4 Press the NEW button again and assign the "Tutorial 2" snapshot to CUE 3, then rename the cue
"VERSE". Again, set TC LINK to OFF. (See Figure 3)
5
Highlight CUE 3 by touching "3" or the cue name, then press the RECALL button at the top of the
touchscreen. The "Tutorial 2" snapshot will be recalled and Channels 1 - 8 will no longer be cut
(or their faders will return to their previous levels).
6
Bring the fader for Channel 8 all the way down and raise the fader for Channel 9. Because of the mult set
up earlier in this Tutorial, it will be carrying the same signal, from track 8 of your multitrack. Equalize
Channel 9 significantly differently than you did Channel 8 (enough so you can hear a difference) and set
its fader to a significantly lower level, then go to the Snapshot window and create and store a new
Snapshot named "track 8 different."
Figure 3
Tutorial 2 Mixing Session (Non-Automated Mixing)
T2-5