Sony DMX-R100 Quick Reference page 10

The Title Manager
2
Begin by creating a new Title as follows: select one of the ten Title slots on the touchscreen and press the
SAVE button in the upper central area of the Window. A Title with the default name "UNTITLED" will
appear in the selected slot.
3
To name the title, first select the name by pressing it on the touchscreen until it turns light yellow and a
flashing cursor appears to the right of the last letter; the Keyboard Window will appear. (See Figure 7)
Enter the desired name by pressing the onscreen "keys," then press the onscreen ENTER key to complete
the operation. You can type in any name of up to 23 characters in length, though only the first 16
characters will appear in the Title Manager Window. Alternatively, if you have an external keyboard
connected to the DMX-R100, it can be used instead. Press the Enter key on your keyboard to complete
the operation.
4
To protect the Title from being overwritten, press the LOCK button in the Information section in the
center of the touchscreen. To unlock it, simply press the LOCK button a second time.
Titles stored in Flash Memory can be instantly recalled at any time from the Title Manager by selecting the Title
number or name and then pressing the LOAD button (see below). However, when loading a Title with a
sample rate or clock source other than the currently selected one, the DMX-R100 will first reboot. The Title
Manager also allows you to delete Titles from memory, clear the contents of the current Title (the currently
selected sample rate and clock source is retained, but all other data is replaced with default values — see Chapter
4 in the DMX-R100 Operating Instructions for a listing), and to store the currently loaded Title to floppy disk.
1-6
Chapter 1 Getting Started
Figure 7