Sony DMX-R100 Quick Reference page 19

Matrixing System
4
To complete the patch, select the individual source, then select the channel. For example, to patch AD
input 1 (the signal connected to the first head amplifier) to input channel 48, press the AD 1-8 box a
second time and then press the box labeled "1." Finally, press Channel 48. (See Figure 16)
5
To mult that signal to channel 47 as well, simply press the Channel 47 button. The signal connected to
the first head amp will now appear on both input channels 47 and 48. (See Figure 17)
Note that all default settings (AD 1 to Channel 1, AD 2 to Channel 2, etc.) can be instantly restored simply by
touching the DEFAULT button on the lower left-hand area of the screen.
Figure 16
Figure 17
Chapter 1 Getting Started
1-15