Sony DMX-R100 Quick Reference page 21

Matrixing System
The basic procedure for using the Output Routing Window is as follows:
1
Press the AUDIO tab at the bottom of the touchscreen, then select OUTPUT ROUTING. The Audio
Output Routing Window appears. (See Figure 18)
2
The BUS section on the left of the screen displays a menu of all possible buses. If you press one of the
BUS buttons a second time, a second drop-down menu will appear. This menu lists all of the
independent sources within each group. For example, press the PGM L/R button and you will see
each output (L and R) separately. (See Figure 19)
Figure 18
Figure 19
Chapter 1 Getting Started
1-17