System Startup - GE Security CyberDome II User Manual

36 CyberDome II
User Manual
Figure 49. Privacy mask select
6. Using the joystick, set the size of the mask by pushing up or down to increase or decrease the vertical
size of the mask (Figure 50), or left or right to increase or decrease the horizontal size of the mask.
Figure 50. Privacy mask adjust
7. When finished, press iris + again to set the mask and return to the Privacy masks menu.
8. Repeat steps 3 through 7 for additional masks.

System startup

The system startup menu allows you to enable, disable, and change passwords, as well as set the installation
date, set an action on power-up, and set position reporting.
Passwords
To change the password from the default of 3477, do the following:
1. Select 2 from the Program select menu 2 (Figure 47 on page 35). The Password protection menu
displays (Figure 51).