Area And Titles - GE Security CyberDome II User Manual

26 CyberDome II
User Manual
4. Enter the preset number (000 to 128) of the preset title to be edited. The Title entry menu displays
(Figure 37).
Figure 37. Title entry menu
5. The display location for the title can be moved up and down onscreen. To set the location, confirm that
the cursor (arrow) is in the far left position (under the preset number). Use the joystick to move the
position of the title up and down. The title cannot be moved from left to right.
6. To enter or edit the title, move the cursor to the right (inside the parentheses). Use the joystick to scroll
up and down to the desired alphanumeric character.
7. When the title is set, press the iris + button to return to the Preset titles menu.
8. Repeat steps 4 through 7 for any additional titles, or press iris - to return to the Edit Titles/Areas menu.

Area and titles

Some CyberDome II models can display a title over a selected area on their pan/tilt routines.
To program a titled area, do the following:
1. Navigate to the Edit titles/areas menu (Figure 35 on page 25).
2. Navigate to option 2 and pan right. The Assigning area titles menu displays (Figure 38).
Figure 38. Assigning area titles menu