GE Security CyberDome II User Manual page 16

8 CyberDome II
User Manual
2. To confirm the restoration of factory defaults (Figure 9) for the feature chosen on the previous menu,
do one of the following:
a. Select option 1 to keep the current settings.
b. Select option 2 to delete the current settings and reload the factory default settings.
Figure 9. Confirm
Note: This process may take some time. Observe the counter for an indication of the progress.
Autoslow shutter
Enable or disable the autoslow shutter feature (Figure 10) to slow down the shutter speed of the camera to see
better in dark situations.This feature is disabled by default and will not be displayed if the camera does not
support autoslow shutter.
Figure 10. Autoslow shutter
Note: This feature is an advanced feature and is only available on day/night capable cameras.