Printing A Start-Up Page - QMS 1660 Getting Started

Printing a
Start-up Page

Printing a Start-up Page

When you turn on the printer, a start-up page prints. This page gives
you an overview of your QMS 1660 Print System.
The following information prints on the start-up page:
n
Printer product name
n
Cumulative number of printed sheets
n
Amount of resident RAM (in bytes)
n
Number of PostScript typefaces in ROM
n
Default resolution
n
Software version, revision, and release numbers
n
Firmware level number
n
Address and status (on or off line) of attached hard disk(s), if any
n
Emulation and protocol information for all standard and optional
interfaces
If the start-up page prints with all the start-up page information, and
the print quality is good, go to chapter 3, "Connecting to a Macintosh,"
or chapter 4, "Connecting to a PC."
Otherwise, see chapter 6, "Troubleshooting," of the Operation manual
for more information on printing a start-up page.
M
WARNING
checking for correct printer installation.
ACHTUNG! Schalten Sie bitte den Drucker aus und ziehen Sie auch
den Netzstecker heraus, bevor Sie die korrekte Installation des
Druckers überprüfen.
2-16
Turn the printer off and unplug the power cord before
!
QMS 1660 Print System Getting Started