Leica M125 Manual page 39

IsoPro™ Motorized Cross-stage: Assembly (continued)
Cross-stage for X-Y Stage Control Module
1. Plug the CTL2 plug of the cross-stage motor
into one of the three available CTL2 inter-
faces.
2. Plug the CTL2 plug of the Leica PSC control-
ler into another CTL2 interface.
The third CTL2 interface is available for
★
connecting other instruments, such as the
Leica foot switch (10 447 398) or TL RCI™
transmitted light base (10 446 352).
The 15-pin Sub-D interface is intended for
★
use with the Leica SmartMove™ controller
(11 501 197).
3. Plug a power cable into the socket provided
and into a grounded power socket.
Leica M series
As soon as all instruments have been plugged
into the control box and it has been plugged
into the power supply, the cross-stage initializes
and automatically drives to the mid position.
4. Connect the PC and X-Y Stage DCI Module
(with a suitable USB cable).
Manual 39