Leica M125 Manual page 34

IsoPro™ Manual Cross-stage: Assembly (continued)
1. Take the glass plate from the cross-stage
and turn it around.
2. Change the gear rod from the left to the
right-hand side.
Leica M series
Control assembly
1. Take the glass plate from the cross-stage
and turn it around.
2. Attach the axis with the control buttons to
the desired side. The fastener snaps into the
cross-stage magnetically.
4. Attach the axis with the two Allen screws
provided.
5. Attach the cover rail to the cross-stage.
Manual
Cross-stage assembly
1. Place the cross-stage on the base.
2. Pull the upper part of the cross-stage care-
fully toward the user, fastening the lower
part onto the transmitted-light base.
34