Troubleshooting - Korg TMR-50 Owner's Manual

indicators of the tuning guide will blink
sequentially in red.
Blinking red
When the formatting procedure is
complete, the power is turned off.
Formatting while using USB power
1.
Turn off the power to the TMR-50.
2.
Press and hold down the A-B/DELETE
button and the REC button while using
a USB cable to connect the TMR-50 to
a computer.
3.
Follow the same procedure as that for
38
formatting while using the batteries.
 Page 37 "Formatting while using
batteries"
4.
When the formatting procedure is
complete, a screen instructing you to
disconnect the unit from the computer
will appear on the display.
 Page 35 "Disconnecting the TMR-50 from
the computer"
5.
Disconnect the TMR-50 from the computer.

Troubleshooting

„ Power does not turn on.
• Could the battery symbol be blinking?
Replace the batteries. Recording is not
possible if the battery symbol is blinking.
• Make sure the batteries are inserted with
the polarities (+, -) in the correct orientation.