Formatting - Korg TMR-50 Owner's Manual

Formatting

If recording or playing back a recorded file
is not possible, an error message will appear.
If this occurs, use a USB cable to connect the
TMR-50 to a computer, and then try running
Chkdsk (Windows) or Disk Utility (Mac OS
X) from the computer. If the issue is still not
improved, follow the procedure below to
format the unit.
Be sure to format using the TMR-50.
Formatting while using batteries
We recommend using USB power when
formatting the unit. (Page 38 "Formatting
while using USB power")
1.
Turn off the power to the TMR-50.
2.
While pressing and holding down the
A-B/DELETE button and the REC button,
press the RECORDER ON button.
The TMR-50 enters format mode. The
following screen will appear on the display,
and the three indicators of the tuning guide
will light up in red.
Lit red
To cancel the formatting procedure, press
the button.
3.
Press the button to format.
While formatting, the following screen
will appear on the display, and the three
37