Setup (Windows Environment)
1. Insert the DTL+ G3 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
Windows XP users will receive a 'Found New
Hardware' notification as seen in
Windows Vista/7 users will receive a device
driver notification as seen in
Once the new hardware detection is complete,
Windows will begin the initialization process.
If the Windows autorun function is enabled,
you can skip the next step and go to page 5 –
Device Initialization.
If the Windows autorun function is disabled, as
it is in Windows 7 by default, you may see an
AutoPlay window similar to the one in
.
2.3
2. Select the option '
If Windows does not AutoPlay, simply browse to the
DVD-RW partition (
the DTLplus_Launcher program. This will also start
the initialization process.
Figure 2.4 – DTL+ G3 Contents
Document No. 480G3001-001.A00
Figure 2.2
Run DTLplus_Launcher.exe
) and manually execute
Figure 2.4
DataTraveler
.
Figure 2.1
.
Figure 2.2 – Device Driver Installation
Figure
'.
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. If enabled, AutoRun
will start the initialization process
®
Locker+ G3
Figure 2.1 – Found New Hardware
(Windows XP)
(Windows Vista/7)
Figure 2.3 – AutoPlay Window
(Windows Vista/7)
Page 4 of 22