Setup (Windows Environment) - Kingston Technology DT4000M-R User Manual

Setup (Windows environment)

1. Insert the DT4000M-R into an available USB port
on your notebook or desktop and wait for
Windows to detect it.
• Windows Vista/7/8 users will receive a device
driver notification as seen in
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
• Windows Vista/7/8 users will see an AutoPlay
window similar to the one in
2. Select the option '
If Windows does not AutoPlay, you can browse to
the CD-ROM partition (
execute the DT4000M-R program.
start the initialisation process.
Figure 2.3 – DT4000M-R contents
Document No. 480DT4000M-R.A01
Figure 2.1
Figure 2.2
Run DT4000M-R.exe
) and manually
Figure 2.3
This will also
Managed-Ready Solution
.
Figure 2.1 – Device driver installation
.
'.
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. AutoRun will start the
initialisation process automatically.
Figure 2.2 – AutoPlay window
)
Page 4 of 14