Chapter 2 Installation; Ceiling Mount Installation - HIKVISION DS?2CC5173P(N)?VP(IR)(?H) User Manual

Chapter 2 Installation
2.1 Ceiling mount installation
Note: If you install the camera on the ceiling, ensure that the ceiling is strong enough to withstand three
times weight of the camera and then install the camera securely. If the ceiling is not strong enough, the
camera may fall and cause serious injury.
1. Loosen the set screws with a
hexagonal screw driver (attached
with the camera), and remove the
dome cover.
2. Loosen the inside set screws located
around the dome core, and remove
the dome core gently.
3. Install the dome base first. Tighten
the screws to the mounting surface.
4. Install the dome core to the dome
base and tighten the screws.
5. Adjust desired focus and scene by
turning and moving the 3‐axis
camera bracket by hand.
6. Install black cover.
7. Install the dome cover and fix with
dome cover screw.
Note:
To Maintain IP66 Weatherproofing, it will be necessary to apply a bead of sealant around the dome
base!
If it is cement wall, user need to use expansion screw. Position of screw installation should be same as
dome.
5