Move the cursor to "VALUE", press up/down to adjust the menu. Move the cursor to "RETURN" and press
the confirm button to return to the previous menu.
3.2.3 WHITE BAL Settings
Press the cursor to "WHITE BAL", then press left / right to select ATW1, ATW2, MANUAL or ATC.
ATW1: Auto traced balance mode 1. Built‐in
indoor environment.
ATW2: Auto traced balance mode 2. Built‐in
outdoor environment.
Manual WB setting is as below:
Select "MANUAL" and the menu is displayed on the screen:
Press up / down to "Temp", and press left / right to adjust the value of temperature. Then move the cursor
to "RETURN" and press confirm button to return to the previous menu.
Press up/down to "BLUE" and "RED", then press left/right to adjust the value. Then move the cursor to
algorithm for automatic white balance setting. Usually used for
algorithm for automatic white balance setting. Usually used for
18