Press up/down to move the cursor to choose characters, numbers, symbols, and press confirm button to
modify the camera ID; press left/right to move cursor to the character of camera ID, press confirm button
to change the characters of camera ID on the discontinues line; move the cursor to the "CLR" to clear all
characters inputted, move the cursor to "POS" setting, and press confirm button to enter the camera ID
position setting menu, then press up/down to change the position of camera ID, press confirm button to
exit the camera ID position setting menu, and return to the camera ID menu; move the cursor to "RETURN"
and press confirm button to return to the previous menu. Move the cursor to "EXIT", press left/right to
"SAVE", press confirm button to exit and save CAMERA ID setting.
3.2.2 Lens Type Settings
Press up/down to move the cursor to "LENS", and press left/right to select the lens type as ELC or ALC.
ELC uses auto electronic shutter to adjust the brightness;
ALC uses auto iris to control camera lens;
Note: ELC: auto shutter, fixed iris;
ALC: auto iris, fixed shutter.
Select ELC and press confirm button then the "ELC Setup" menu is showed on the screen.
Press up/down to move the cursor to the "VALUE", press left/right to adjust brightness, move the cursor to
"RETURN" and press confirm button to return to the previous menu.
Note: Different values represent the different brightness.
Select ALC and press confirm then "ALC Setup" menu is displayed on the screen:
17