3.2.4 BLC/ECLIPSE Settings
BLC: Back Light Compensation
Press up / down to "BLC/ECLIPSE", and press confirm button , and the menu is displayed on the screen:
Move cursor to "BLC/ECLIPSE", press left/right to "BLC" and press confirm button to enter the BLC SETUP
menu.
Move cursor to "VALUE" to select LOW,MID or HIGH.
Move cursor to "AREA", press confirm button to enter the submenu. First, press direction button to set the
BLC area position as up, down, left, right or middle , then press confirm button to set the size of BLC area in
the same way. Press confirm button to choose "RET" to return to the previous menu or "AGAIN" to reset
position and size.
Move cursor to "DEFAULT" to set VALUE and AREA as default setting. In default setting, VALUE is MID and
position of the BLC area is in the middle.
Move the cursor to "RETURN", press confirm button to return to the previous menu.
20