Removing The Lcd Assembly - Packard Bell oneTwo M3850 Service Manual

Removing the LCD Assembly

1. Remove the I/O cable plate by following the procedure described on page 28.
2. Remove the optical drive by following the procedure described on page 29.
3. Remove the scaler board by following the procedure described on page 31
4. Remove the USB/audio board by following the procedure described on page 33.
5. Remove the mainboard by following the procedure described on page 42.
6. Remove the PSU by following the procedure described on page 44.
7. Disconnect the light bar cables from the light bars.
8. Remove the screws securing the speakers.
Quantity
4
9. Remove the speakers.
Packard Bell oneTwo M3850 / oneTwo M3851 / oneTwo L5850 / oneTwo L5851 Service Guide
Color Torque
Black 4.0 kgf-cm
Part Number
86.3AR26.8R0
49