Removing The Scaler Board - Packard Bell oneTwo M3850 Service Manual

6. Detach the ODD bezel from the module.

Removing the Scaler Board

1. Remove the rear cover by following the procedure described on page 28.
2. Remove the screw securing the scaler board cover.
Quantity
1
3. Slide the scaler board cover towards the speaker area to disengage the cover tabs from the main chassis,
then remove the scaler board cover.
Packard Bell oneTwo M3850 / oneTwo M3851 / oneTwo L5850 / oneTwo L5851 Service Guide
Color Torque
Black 4.0–4.5 kgf-cm
Part Number
86.00B75.240
31