Removing The Hard Disk Drive - Packard Bell oneTwo M3850 Service Manual

3. Slide the wall mount plate towards the HDD area to disengage the plate tabs from the main chassis, then
remove the wall mount plate.

Removing the Hard Disk Drive

1. Remove the wall mount plate by following the procedure described on page 35.
2. Remove the screw securing the inverter board cover.
Quantity
1
3. Remove the inverter board cover.
36 Packard Bell oneTwo M3850 / oneTwo M3851 / oneTwo L5850 / oneTwo L5851 Service Guide
Color Torque
Black 4.0–4.5 kgf-cm
Part Number
86.00B75.240