Removing The Lcd Assembly - Packard Bell oneTwo M3600 Service Manual

Removing the LCD Assembly

1. Remove the front bezel by following the procedure described on the page 28, then disconnect the
disconnect the webcam cable from the webcam module.
2. Remove the screws securing the LCD assembly to the rear cover.
Quantity
6
3. Detach the LCD assembly from the rear cover and turn it over to access the LCD panel cables.
4. Disconnect the LCD and inverter cables from the mainboard.
30
Color Torque
Black 4.0 +/- 0.3 kgf.cm
Packard Bell oneTwo M3600 AIO Computer Service Guide
Part Number
86.ZA324.8R0