Removing The Optical Disc Drive - Packard Bell oneTwo M3850 Service Manual

3. Push the latch to disengage the I/O cable plate from the main chassis.
4. Remove the I/O cable plate (a), then pull out the HDMI cable through the plate opening (b).

Removing the Optical Disc Drive

1. Remove the rear cover by following the procedure described on page 28.
2. Remove the screw securing the ODD.
Quantity
1
Packard Bell oneTwo M3850 / oneTwo M3851 / oneTwo L5850 / oneTwo L5851 Service Guide
Color Torque
Black 4.0–4.5 kgf-cm
Part Number
86.00B75.240
29