Removing The Inverter Board - Packard Bell oneTwo M3850 Service Manual

7. Remove the screws securing the hard drive to its cage.
Quantity
4
8. Use a small metal screwdriver to push the hard drive out of its cage (a), then pull out the drive out (b).

Removing the Inverter Board

1. Remove the wall mount plate by following the procedure described on page 35.
2. Remove the inverter board cover by following steps 2 and 3 on page 36.
3. Disconnect all cables from the inverter board.
38 Packard Bell oneTwo M3850 / oneTwo M3851 / oneTwo L5850 / oneTwo L5851 Service Guide
Color Torque
Silver 4.0–4.5 kgf-cm
Part Number
86.00J44.C60