Removing The Lcd Lvds Cable; Removing The Lcd Panel Bracket And Inverter Board - Packard Bell oneTwo M3600 Service Manual

Removing the LCD LVDS Cable

1. Remove the LCD assembly by following the procedure described on the previous section.
2. Disconnect the LCD cable from the LCD board.

Removing the LCD Panel Bracket and Inverter Board

1. Remove the LCD assembly by following the procedure described on the page 30.
2. Remove the screws securing the LCD panel and inverter board brackets.
Quantity
4
3. Detach the LCD panel bracket from the LCD panel, then turn over the inverter board bracket to access the
inverter board cables.
Packard Bell oneTwo M3600 AIO Computer Service Guide
Color Torque
Chrome 4.0 +/- 0.3 kgf.cm
Part Number
86.00K96.644
31