4 Operating the appliance
4.1 Control panel
4.1.1
Control panel DIEMATIC-m3
Electromechanical components
1. General ON
/ OFF
2. Reset button
3. Flap
4. Timed circuit breaker (4 A)
5. Connector for the programming tool
6. Display
6
switch
The panel must always be supplied with 230V voltage:
- to ensure the anti-grip of the heating pump,
- to ensure Titan Active System® operation when a titanium anode
is protecting the DHW tank.
Furthermore, if an interactive remote control (CDI 2) is connected
and the 1 switch is in the off
the CDI 2.
See: "Control panel instructions"
C 230 ECO
position, there will be no display on
20/02/09 - 300015144-001-C