Table of Contents
Advertisement
Administration
Managing User Accounts
STEP 1
STEP 2
STEP 3
STEP 4
Managing User Accounts
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
•
State—State of the neighbor. The following are the states for dynamic
entries:
-
Reachable—Confirmation was received within a preconfigured interval
that the forward path to the neighbor is functioning properly. While in the
Reachable state, the device takes no special action as packets are sent.
-
Delay—More time has elapsed than a preconfigured interval since the
last confirmation was received that the forward path was functioning
properly.
•
Age Updated—The time in seconds that has elapsed since an entry was
added to the cache.
•
Type—Neighbor discovery cache information entry type (static or
dynamic).
You can click Clear Dynamic Neighbors to clear the table.
Adding Static IPv6 Neighbors
The switch supports up to 16 static IPv6 neighbor entries. To add a static
neighbor:
Click Add.
Enter an IPv6 global address (not including a prefix length).
Enter the MAC address of the neighbor.
Click Apply. Your changes are saved to the Running Configuration.
One management user is configured on the switch by default:
•
User Name: cisco
•
Password: cisco
You can use the User Accounts page configure up to five additional users and to
change a user password.
4
37
Advertisement
Table of Contents
