Cisco SG200 Series Administration Manual page 53

Small business 8-port smart switch
Hide thumbs Also See for SG200 Series:
Table of Contents

Advertisement

Administration
File Management
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
Update the language files by downloading a new file from a server.
Language files determine the language options for the web-based switch
configuration utility. You can select the display language when you log in.
Back up the firmware image to a server.
English is always the default language.
You can also back up or restore the configuration files. See
Backing Up the Configuration and Log Files
To upgrade or backup the firmware or to update the boot code or language file:
Click Administration > File Management > Upgrade/Backup Firmware/
Language in the navigation window.
Enter the parameters:
Transfer Method—Select the protocol to be used for the file transfer (TFTP
or HTTP), which corresponds to the type of server you are downloading to
or uploading from.
Save Action—Select Upgrade to download a file to the switch, or select
Backup to copy a file from the switch to the server.
File Type—Select the type of file to upgrade or back up (you can back up
only the firmware image):
-
Firmware Image—Software that controls all switch features and
interfaces.
-
Boot Code—Software that controls the initial system bootup.
-
Language Pack—The files that enable the system interface to display
the language specified by the user on the login page.
TFTP Server (TFTP only)—Specify the IPv4 or IPv6 address of the TFTP
server.
Source File Name—For upgrades via TFTP, enter the filename, including the
path. For upgrades via HTTP, browse and select the file from your computer.
Destination File Name—For backups via TFTP, enter the filename, including
the path. This field does not appear for backups via HTTP.
Click Apply to begin the upgrade or backup. A progress bar indicates the status of
the file transfer. A typical image transfer might take 5-6 minutes to complete.
Reboot the switch to use the new configuration or firmware.
Downloading and
for more information.
4
53

Advertisement

Table of Contents
loading

Table of Contents