Changing A User Password; Deleting A User; Enabling Management Services - Cisco SG200 Series Administration Manual

Administration

Enabling Management Services

STEP 1
STEP 2
STEP 3
STEP 4
Enabling Management Services
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide

Changing a User Password

To change a user password:
Click Administration > User Accounts in the navigation window.
Select the user to configure and click Edit.
Enter a password between 1 and 64 characters (depending upon the
Strength setting) and confirm the password. (The characters ', ", %, and ? are not
supported.)
As you enter a password, the number and color of vertical bars changes to
indicate the strength of your password. Red bars indicate a weaker password.
Orange bars indicate a stronger password, and green bars indicate the strongest
password level.
When changing a password, you can temporarily disable the password strength
check feature to allow configuring a password that does not meet the strength
check criteria. Click Disable Password Strength Enforcement and then click OK
when the warning displays.
To disable the password strength check feature for all users, or to configure its
characteristics, use the Password Strength page.
Click Apply and then click Close. Your changes are saved to the Running
Configuration.

Deleting a User

You can delete all users except the default user, typically the cisco user ID.
To delete a user, select the user name in the User Accounts Table and click Delete.
Use the Management Services Page to configure the TCP port number for HTTP
connections to the web-based switch configuration utility.
The default port number for HTTP connections is the well-known IANA port
number 80. To configure a different HTTP port number:
4
Password
39