Voice Announcement - Motorola APX 6000 User Manual

6
A blinking cursor appears in the Edit Soft ID screen.
Use the keypad to edit the text.
<
Press to move one space to the left.
>
Press to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
*
Press to add a space.
0
Press to toggle between mixed case mode, uppercase
mode, and lowercase mode.
#
Press to toggle between numeric and letter mode.
7
Press the Menu Select button directly below Ok to save the
new Soft ID and return to the previous screen.
OR
Press the Menu Select button directly below Cncl to return
to the previous screen.
112
English

Voice Announcement

This feature enables the radio to audibly indicate the current
feature mode, Zone or Channel the user has just assigned. This
audio indicator can be customized per customer requirements.
This is typically useful when the user is in a difficult condition to
read the content shown on the display.
Each voice announcement is within a limit of three seconds
maximum. The sum total duration for all voice announcements
in a radio shall be no more than 1000 seconds.
Note: This feature must be preprogrammed by a qualified
radio technician.
The features which Voice Announcement supports are:
•
Zone
•
Channel
•
Scan
•
PL Disabled
•
Talkaround/Direct
•
Tx Inhibit
Note: Voice announcements support certain number of zone-
channel, but not all.
Seek advice from your dealer or qualified technician for
the best selections for this feature.