Classifying Regrouped Radios; Contacts - Motorola APX 6000 User Manual

3
The display shows Reprgrm rqst and Please wait.
4
If you hear five beeps, the dispatcher has acknowledged the
reprogram request. The display shows Ack received and
the radio returns to the Home screen.
OR
If the dispatcher does not acknowledge the reprogram
request within six seconds, a low-pitched alert tone sounds
and the display shows No acknowledge.
H
Try again or press to cancel and return to the Home
screen.

Classifying Regrouped Radios

The dispatcher can classify regrouped radios into either of two
categories: Select Enabled or Select Disabled.
•
Select-enabled radios are free to change to any available
channel, including the dynamic-regrouping channel, once the
user has selected the dynamic-regrouping position.
•
Select-disabled radios cannot change channels while
dynamically regrouped. The dispatcher has forced the radio
to remain on the dynamic-regrouping channel.
The Scan or Private Call feature cannot be selected while your
radio is Select Disabled.

Contacts

This feature provides "address-book" capabilities on your radio.
Each entry corresponds to an alias (name) or ID (number) that
you use to initiate a call.
Contacts entries are alphabetically sorted according to entry
alias. Each alias can have up to 5 IDs of different call types
associated with it.
Additionally, each entry, depending on context (conventional,
trunking, or phone), associates with one or more of the four
types of calls: Phone Call, Selective Call, Private Call, or Call
Alert.
Each entry within Contacts displays the following information:
•
Call Alias (Name)
•
Call ID (Number)
•
Call Type (Icon)
•
WACN ID (Astro 25 Trunking IDs only)
•
System ID
Note: Your radio must be preprogrammed to allow you to
add, edit, or delete the contact entries.
47
English