Procedure:
Turn the preprogrammed 16-Position Select knob to the
desired channel.
OR
Follow the procedure below.
1
<
>
or
to Chan.
2
Press the Menu Select button directly below Chan.
3
U
D
or
to the required channel.
OR
Use the keypad to enter the channel number.
4
If the channel number entered is unprogrammed, the display
shows Invalid entry. Repeat Step 3.
OR
Press the Menu Select button directly below Sel to confirm
the selected channel.
5
Press the PTT button to transmit on the displayed zone
channel.
Receiving and Responding to a Radio Call
Once you have selected the required channel and/or zone, you
can proceed to receive and respond to calls.
LED Indicator
The LED lights up solid red while the radio is transmitting, and
solid yellow when the radio is receiving a transmission
(conventional mode only). There is no LED indication when the
radio receives a transmission in trunking mode.
If the radio is receiving a secure transmission, the LED blinks
yellow.
35
English