Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ozito DGR-6000
Summary of Contents for Ozito DGR-6000
- Page 1 WHAT’S IN THE BOX STRAIGHT GRINDER Straight Grinder (DIE) 500W Collet Nut Spanner INSTRUCTION MANUAL SPECIFICATIONS Spindle Lock Spanner Input: 500W Rated Speed: 28,000 / min Accessory Diameter: 25mm Collet Size: 6.35mm Weight: 1.85kg ozito.com.au DGR-6000...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION STRAIGHT GRINDER 1. FITTING ACCESSORIES 1 Collet Nut 4 Metal Gear Box 2 6.35mm Collet 5 On/off Switch 3 Soft Grip Sleeve 6 Rear Handle NOTE: ONLY USE ACCESSORIES WITH A 6.35MM (1/4”) SHAFT AND A RATED RECOMMENDED SPEED OF NO LESS THAN 29,000/MIN Caution: Ensure the tool is disconnected from the power supply before performing any of the following operations. -
Page 3: Operation
OPERATION 2. FITTING ACCESSORIES CONT. 3. LOCK ON SLIDE SWITCH The tool is recommended for use with a residual current NOTE: INSPECT THE ACCESSORY BEFORE device with a rated residual current of 30mA or less. FITMENT TO ENSURE IT IS NOT DAMAGED OR DEFORMED. - Page 4 3. For a rougher finish and more material removal, slowly work the tool in a leftward direction. 4. For a smoother finish and less material removal, slowly work the tool in a rightward direction. DGR-6000...
-
Page 5: Maintenance
Always replace both carbon brushes at the same time. required. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the straight grinder by an unauthorised person or by mishandling of the straight grinder. - Page 6 Tool: 500W Die Grinder SPARE PARTS Model No. DGR-6000 15 16 35 36 40 41 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No.
-
Page 7: Electrical Safety
Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. -
Page 8: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0213...
Need help?
Do you have a question about the DGR-6000 and is the answer not in the manual?
Questions and answers