Ozito PXBAGS-125 Instruction Manual

Ozito PXBAGS-125 Instruction Manual

18v brushless 125mm angle grinder
Hide thumbs Also See for PXBAGS-125:

Advertisement

Quick Links

125MM ANGLE
GRINDER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
8,500/min
Disc Diameter:
125mm (5")
Spindle:
M14
Weight:
1.74kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO INDUSTRIES PTY. LTD.
WARRANTY
25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
Angle Grinder
Side Handle, Grinding Guard &
Pin Wrench
Grinding Disc
PXBAGS-125
1121

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXBAGS-125 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXBAGS-125

  • Page 1 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175. 1121...
  • Page 2: Know Your Product

    BATTERY & CHARGER locking lever. This tool is compatible with all batteries & chargers from the Ozito PXC range. For optimal performance, we recommend the use of a 3.0Ah battery or higher to operate this PXC tool.
  • Page 3 2. FITTING THE DISC 5. When assembling the outer flange, ensure you select the correct WARNING! ENSURE THE TOOL IS SWITCHED orientation to suit the type of disc being fitted. OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS. WARNING! ALWAYS WEAR GLOVES WHEN Grinding disc: Place outer...
  • Page 4: Fitting The Battery

    3. CHANGING THE GUARD 4. FITTING THE BATTERY Installing The Battery Pack WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE 1. Slide the battery into the tool PERFORMING ANY OF THE FOLLOWING TASKS. base until it clicks into place. A safety guard should be used at all times whilst operating the angle grinder, but there are times when you should swap the guard, such as when switching...
  • Page 5: Operation

    3. Begin grinding your workpiece. The optimum grinding angle is 10-150 to automatically spring backwards into the workpiece. the off position. Note: Do not apply excessive pressure. Allow the tool to do the work, this will prevent deep gouging. 10-15° PXBAGS-125...
  • Page 6: Troubleshooting

    6. CUTTING 7. TROUBLESHOOTING LED lights do not illuminate on charger WARNING! WHEN USING THE ANGLE GRINDER WITH A CUTTING DISC, A CUTTING GUARD (NOT Check the charging adaptor is securely plugged into the wall out let. SUPPLIED) MUST BE FITTED PRIOR TO OPERATION. Check the battery is firmly connected to the charging cradle.
  • Page 7: Maintenance

    When not in use, the tool should be stored in a dry, frost free location, keep out of children’s reach. Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by...
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.

Table of Contents