Related Manuals for Ozito AGG-051K
Summary of Contents for Ozito AGG-051K
- Page 1 AGG-051K manual.qxd 9/24/09 9:48 AM Page 1 Angle Grinder 230mm - 2200 Watt Operation Manual 3 Year Replacement Warranty AGG-051K 0909 www.ozito.com.au To view the full range visit:...
- Page 2 AGG-051K manual.qxd 9/24/09 9:48 AM Page 2 SPECIFICATIONS - MODEL NO. MSH-115 SPECIFICATIONS - MODEL NO. AGG-051K Motor: 2200W No load speed: 6000 rpm Disc size: 230mm (9”) Spindle size: Bore size: 22mm Features: Soft start Rotatable rear handle Soft grip Safety lock off switch 1.
-
Page 3: Safety Instructions
The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. - Page 4 AGG-051K manual.qxd 9/24/09 9:48 AM Page 4 GENERAL 1. Keep work areas clean. Cluttered work areas and benches can cause accidents. 2. Consider work area environment. Do not expose your tool to high humidity or rain. Do not use your tool in damp or wet conditions. Keep the work area well lit.
- Page 5 AGG-051K manual.qxd 9/24/09 9:48 AM Page 5 GENERAL (cont.) 13. Check for damaged parts. Before use carefully check the tool and power lead for damage. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation.
-
Page 6: Operation
Make sure the grinding or cutting disc is mounted with the label on top or facing the angle grinder. If you are fitting any other kind of attachment, refer to attachment fitting instructions. Ozito Industries P/L will not be responsible for any damage or injury caused due to the incorrect fitting of grinding or cutting discs or any other kind of attachment. - Page 7 AGG-051K manual.qxd 9/24/09 9:48 AM Page 7 OPERATION (cont.) Adjusting the Safety Guard Ensure the guard is fitted and at an angle which ensures it is between you and the disc/wheel. The guard is there to protect you from dislodging objects at the work piece and from accidental contact with the disc/wheel, of your hand, fingers or other parts of your body.
- Page 8 AGG-051K manual.qxd 9/24/09 9:48 AM Page 8 OPERATION (cont.) Paper Washers 10 paper washers have been included in this kit. These are for using with cutting discs. When using cutting discs with angle grinders, it is not uncommon for the outer flange to self tighten during use.
-
Page 9: Maintenance
Always replace both brushes at the same time. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool. -
Page 10: Caring For The Environment
Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Angle Grinder AGG-051K 1 x 80mm Set of flanges 1 x 230mm Grinding disc 10 x Paper washers... -
Page 11: Warranty
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.
Need help?
Do you have a question about the AGG-051K and is the answer not in the manual?
Questions and answers