Ozito PXAGS-500 Instruction Manual

Ozito PXAGS-500 Instruction Manual

115mm angle grinder
Hide thumbs Also See for PXAGS-500:

Advertisement

115MM
ANGLE GRINDER
INSTRUCTION MANUAL

SPECIFICATIONS

Voltage:
18V
No Load Speed:
8500/min
Disc Diameter:
115mm (4
")
1/2
Spindle:
M14
Weight:
1.8kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WHAT'S IN THE BOX
Angle Grinder
Side Handle
Safety Guard
Pin Wrench
Grinding Disc
PXAGS-500
0817

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXAGS-500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXAGS-500

  • Page 1: Specifications

    Spindle: Weight: 1.8kg Grinding Disc ozito.com.au PXAGS-500 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS Our goods come with guarantees that cannot be excluded at law.
  • Page 2: Know Your Product

    BATTERY & CHARGER 3 Tighten the safety guard locking This tool is compatible with all battery and chargers from the Ozito screw to secure in position. Power X Change Range. For optimal performance, we recommend the use of a 3.0Ah battery or higher to operate this Power X Change Angle Grinder.
  • Page 3 2. REPLACING A GRINDING DISC Inserting & Removing the Battery 1 Depress and hold the spindle lock to prevent the spindle spinning. 1 Align the ribs of the battery with the recess at the back of the angle grinder & push in until it clicks into place.
  • Page 4: Operation

    3 Begin grinding your workpiece. The optimum grinding angle is 10-15 the workpiece. Note: Do not apply excessive pressure. Allow the tool to do the work, this will prevent deep gouging. 10-15 PXAGS-500...
  • Page 5: Troubleshooting

    Wear eye protection within the reach of children. a safety mask Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the angle grinder by an unauthorised person or by mishandling of the angle grinder.
  • Page 6: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current plate. device reduces the risk of electric shock. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. GENERAL POWER TOOL SAFETY WARNINGS WARNING! Dress properly.
  • Page 7 Save these instructions and other documents supplied with this tool for future reference. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. DESCRIPTION OF SYMBOLS This tools charger is double insulated therefore no earth wire is required.
  • Page 8: Charging A Battery

    1. CHARGING A BATTERY 2. MAINTENANCE This charger is compatible with batteries from the 18V Ozito Power X Change range • Disconnect the charger from power source before cleaning. available through your local Bunnings Warehouse: Product availability may differ. • Keep the charger in a dry place out of reach of children.
  • Page 9: Battery Safety Warnings

    Save these instructions and other documents supplied with this tool for future reference. DESCRIPTION OF SYMBOLS Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated therefore no earth wire is required.
  • Page 10 Australia 1800 069 486 tool) for the battery to reach its optimum performance / runtime. This battery is compatible with chargers from the 18V Ozito Power X Change range New Zealand 0508 069 486 available through your local Bunnings Warehouse: Product availability may differ.

This manual is also suitable for:

Pxbags-125

Table of Contents