1. All motors have a nominal speed of 1800 RPM, at 1.5 service factor and a solid base.They can operate to the limit of their service factor because
they are located in the moving air, upstream of any heating device.
TABLE 8: STATIC RESISTANCES
WET COIL
ELECTRIC HEAT OPTIONS
ECONOMIZER OPTION
HORIZONTAL DUCT CONNECTIONS
1. Deduct these resistance values from the available external static pressures shown in the respective Blower Performance Table.(See Note 2 for
exception).
2. Since the resistance to airflow will be less for horizontal duct connections than for bottom duct connections, add these pressures to the ESP values
listed in the respective units' blower performance table.
TABLE 9: POWER EXHAUST PERFORMANCE
MOTOR
0.2
SPEED
CFM
KW
1
5250
0.83
HIGH
MEDIUM
4900
0.77
LOW
4400
0.72
1. Factory Setting
Power Exhaust motor is a 3/4 HP, PSC type with sleeve bearings, a 48 frame and inher-