Download A New Version Of Software And/Or Language; Rs232 And Ethernet Protocol - TAG Heuer Chronoprinter 540 User Manual

17. Download a new version of Software and/or language

Program downloads and new releases of CP 540 software are available Free of Charge on our website
www.tagheuer-timing.com
For this operation, you need to have:
•
RS232 cable – (Sub-D9p/RJ11) HL540-10
•
PC with output RS232 (Sub-D9p)
•
The software « CP540 Firmware.exe »
Procedure
1. Copy the software «CP540 Firmware.exe » onto your hard disk
2. Power the CP 540 with an external power supply (The CP 540 is off).
3. Connect the RS232 cable (HL540-10) to the PC and the CP 540
4. Run the software « CP540 Firmware.exe »
Select Serial Port
Select File Name
5. Select the COM Port
6. Select the file: Update (CP540_xxx.dat)
7. Press START on the software.
8. Power ON the CP540 (press the ON button for 5 seconds)
The CP 540 will go into a special mode « Download ».
The LDC back light will be ON, but LCD will be blank.
9. As soon as the upgrade is downloaded into the CP 540, validate the software with OK.
10. Remove the RS232 cable from the CP 540, and switch on the CP 540 again.
11. The new software version will be printed (if the Printer is in ON)

18. RS232 and Ethernet Protocol

For details of the communication protocol, please refer to the document: THCOM08.
Please contact us directly at : info@tagheuer-timing.com
TAG Heuer Timing Page 35 / 44