Information About Timing Modes - TAG Heuer Chronoprinter 540 User Manual

15. Information about Timing Modes

Each Timing Mode has parameters that are memorized (default) based on those given during the last timing
session.
CHRONOPRINTER 540
N°0003
DATE <DMY>
HOURS <HMS>
MEMORY FREE
*****************************
PTB SEQUENTIAL
PRECISION
INPUT 1 LOCK TIME 1.00 S
INPUT 2 LOCK TIME 0.10 S
INPUT 3 LOCK TIME 0.10 S
INPUT 4 LOCK TIME 0.10 S
RS232 OUTPUT TO PC
BAUDS RATE 9600
*****************************
ETHERNET OFF
*****************************
ENTER THE MENU
PTB SEQUENTIAL
NET TIME
NET TIME + 2 INTER
TAG Heuer Timing
V.A-08
04.12.07
14:07:34
26500
1/1000 SEC
F
•
4 active inputs with sequential numbering of time for each input
•
Start on input 1
•
Finish on input 4
•
Inputs 2 and 3 are not using
•
Automatic numbering on Start and Finish.
•
Calculation mode with truncation
•
Start on input 1
•
Intermediate and/or speed on Inputs 2 and 3
•
Finish on input 4
•
Automatic numbering on start and finish
Intermediate times with manual numbering by default
•
Calculation mode with truncation
Each Timing Mode proposes the main parameters
memorized by default or used during the last timing
session.
Example:
PTB SEQUENTIAL Mode
Page 26 / 44