Addition Of Runs; Bibo Rule; Ranking (F + ◄┘); Rank A Run - TAG Heuer Chronoprinter 540 User Manual

9.1.

Addition of runs

Before to close a run, be sure that the results are correct. It is not possible to make further
modifications after a run is closed.
If you want to add a previous run to the new one, select your choice in the menu List of Runs. After
that, the CP540 will ask you "Activate BIBO?" in the
It is also possible to combine 2 runs already closed.
Select

Rank a run,

9.2.

BIBO rule

BIBO is a very familiar feature in Alpine Ski racing.
It refers to the establishment of a reverse running order of a certain number finishers from the results
of a proceeding run. The input of a BIBO value as required. Most FIS and USSA events use "flip 30".
In other words, the top 30 finishers from the first run will run in reverse order in the second run.
Ex: If you flip the 1
position to the 1
If BIBO is not activated, the starting order will refer to the ranking of the proceeding run.
PLEASE NOTE
If several competitors are ranked with the same time (tie) at the 30th position in the
proceeding run, BIBO will take in account these entire competitors N°'s.
+ ◄┘)
9.3. Ranking (F
General ranking of the actual run.
9.4. Rank a Run
Ranking of the actual run or proceeding runs.
TAG Heuer Timing
one of the run you want to add.
st
30 competitors, the start order will refer to the competitor ranked from the 30
st st
and then to the 31 and up.
NET TIME START – FINISH Modes.
th
Page 20 / 44