TAG Heuer HL 200 User Manual

MARTEL THERMAL PRINTER HL 200
Features
High speed, high resolution printing
•
Quiet, non-impact system
•
Maintenance-free
•
Compact and light-weight
•
High Reliability
•
Versatile for use with text or graphics
•
12, 16, 24, 32 or 48 characters per line
•
Barcode capability
•
Auto wake-up facility
•
Supports labels and dual ply paper
•
The MCP9810-112 is a compact and lightweight portable printer with an RS232 serial interface via a 9-way D-type
connector.
It is powered from internal NiMH batteries and has maintenance free operation, only available with thermal printers.
The standard unit is intended to be trickle charged from a mains power adapter and fast charge option can be
supplied. UK, Euro and US versions of the power adapter are available.
Designed for maximum versatility, the MCP9810-112 is capable of many different modes of operation with
numerous character sets.
Operation is controlled by a combination of switch settings and external software Commands.
The MCP9810-112 is one of a family of thermal printers designed and manufactured in the UK by Martel. All units
are built into robust ABS housings, with a choice of colours
Specification
Printing System
Max characters per line
Character matrix
Character size
Horizontal dot pitch
Vertical dot pitch
Text line composition
Printing width
Average printing speed
Dimensions
Weight Approx.
Internal power supply
Paper width
Character set
Country codes
Interface
Input data format RS232C (1 Start, 8 Data, 1 Stop, No Parity)
Connector
Baud rates
Handshaking
Buffer size
Environmental Conditions
Operating range
Storage range
Charging range
MTBF
User's Manual
Thermal line head system
48
24x16, 24x12 or 24x8
3mm x 2mm, 3mm x 1.5mm or
3mm x 1mm (Approx. 13, 17 or 25cpi)
0.125mm (Approx. 200dpi)
0.125mm
24x384 dots
48mm
10 lines per second
135mm x 130mm x 64mm
425 grammes
4.8V (600mAH, NiMH battery pack)
58mm
UK/United States (437)
USA, France, Germany, UK, Denmark I/II,
Sweden, Italy, Spain & Japan
9-way D-type socket
1200, 2400, 4800 & 9600
Hardware (CTS line) or Software (XON/XOFF)
5 KBytes
-20oC to +50oC
-20oC to +60oC
+10oC to +45oC
Approx. 10 Million lines (20oC, print ratio = 25%)
Version 2008
Serial Interface
The RS232 standard is used, and the baud rate is selectable from
1200, 2400, 4800 and 9600 bits per second via the DIP switches.
110, 300, 600 and 19200 baud rates can be made available as an
option.
The printer is fitted with a 9-way D-type socket (Fig 1 illustrates the
pin numbers for the connector), the pin assignments and interface
signals are defined below.
PIN Signal
1 n/c
2 TxD
3 RxD
4 n/c
5 GND
6 n/c
7 n/c
8 CTS
9 n/c
Fig 1: Pin Numbers for
Serial Interface Connector
I/O Definition
N/A No connection
0 Transmitted data to host
I Received data from host
N/A No connection
N/A Signal Ground
N/A No connection
N/A No connection
0 Clear to send
N/A No connection
5 ----------1
9 ------- 6
1