Problem Solving
Check
Are you projecting a split screen?
Is the projector in standby status?
I want to change the language for messages and menus
Check
Change the Language setting.
Email is not received even if a problem occurs in the projector
Check
Is Standby Mode set to Communication On?
Is power being supplied to the projector?
Is the Mail Notification function set correctly in the Configuration
menu?
"The battery that saves your clock settings is running low." is displayed
Check
The internal power supply that saves your clock settings may
be running low.
Only RGB signals projected on the left screen from the Computer port or the BNC port can be displayed on an
external monitor.
s "Projecting Two Images Simultaneously (Split Screen)"
Check that Standby Mode, A/V Output, and Monitor Out from the Configuration menu are set correctly.
s Extended - Standby Mode, A/V Settings
Adjust the Language setting from the Configuration menu.
s Extended - Language
p.125
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s Extended - Standby Mode
p.125
Check that your electrical outlet or power source is functioning correctly.
An error notification email is sent according to the Notifications settings in the Configuration menu. Check if it is set
correctly.
s "Notifications menu"
p.134
Contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Remedy
p.97
p.125
Remedy
Remedy
Remedy
172