Guarantee And Clauses - Alcatel-Lucent OmniTouch 8002 User Manual

Deskphone omnipcx office rich communication edition
Hide thumbs Also See for OmniTouch 8002:
Table of Contents

Advertisement

Guarantee and clauses

Safety Instructions
Changes or modifications to the equipment not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
To limit the risk of interference, people with pacemakers must keep the wireless telephone away from
their equipment (minimum distance of 15 cm/6 inches).
Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a safe
distance between your pacemaker or implant defibrillator and the handset which includes magnetic
elements: 4 centimeters (1 inches) at least
It is recommended to follow the standard acceptance procedures before using this equipment in
human safety critical areas (hospitals...).
The handset includes magnetic elements that may attract sharp metallic objects. To prevent injury,
before each use ensure sharp metallic objects are not stuck to the earpiece.
Avoid using phones (other than cordless) during an electrical storm. There may be a remote risk of
electric shock from lightning
Do not use the device in environments where there is a danger of explosion
Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a regular
Public Switched Telephone Network (PSTN) connection. This can result in severe damage to the
phone
Never allow your telephone to come into contact with water
To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone, etc.)
which may damage the plastic parts of your telephone. Do not use aerosol cleaners.
Class 2 for OmniTouch äó 8012 DeskPhone according to IEEE802.3af), or via DC-in by a Certified
Direct Plug-In or Cord connected Power Unit approved as ȼLPS ÈÝ (Limited Power Source)
against CSA/UL/IEC 60950-1 and rated 5V dc, minimum 1A.
Allowed power supply is: SCE0501000P from Helms-Man
If you are connected to a POE connection do not use AC power supply
Regulatory Statements
Marking
This equipment is in compliance with the essential requirements of R&TTE Directive
1999/5/EC and with Directive 2011/65/UE (ROHS).
The Declaration of Conformity may be obtained from:
Alcatel-Lucent 3 avenue Octave Gréard 75007 Paris, France
ebg_global_supportcenter@alcatel-lucent.com.
USA and Canada
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation
is subject to the following two conditions : (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation. This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules and ICES-003 of Canada. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try correct the interference by consulting the dealer.
howtoc
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents