Device Search; Adding Cameras From The Lan - FLIR DNR100 SERIES Instruction Manual

13 Using the Main Menu

13.3 Device Search

The Device Search menu allows you to manage connections to your IP cameras. SyncroIP
cameras connected to the PoE (Power over Ethernet) Ports will automatically be detected
by your NVR. Device Search also allows you to search for IP cameras connected to the
LAN. Some configuration may be required to connect IP cameras from other
manufacturers.
Note
For a list of 3rd party IP cameras supported, visit

13.3.1 Adding Cameras from the LAN

1. Connect the camera to a router or switch on the same network as the NVR.
2. Right-click and select Device Search. Log in using the admin account (the default
user name is admin and the default password is 000000).
3. Click IP Search. The NVR scans your LAN for compatible IP cameras.
4. Check the camera(s) you would like to add and click Add.
5. If the Status indicator is green, the camera is connected and no further configuration is
required. Click OK to save changes.
#; r. 1.0/12560/12560; en-US
www.flirsecurity.com/pro.
40