Furuno MU-201C Operator's Manual page 14

2. Press [▲] or [▼] to select the item desired.
The selected item is displayed in gray.
For item when you change the numeric value, go to step 3. For the other items, go to step
5.
3. Press [◄] or [►] to set value.
Pressing [◄] decreases numeric value and pressing [►] increases it.
When setting backlight, use
4. If necessary, repeat steps 2-3 to adjust other items.
5. Press the [MENU] key.
For AutoAdjust or AutoColor, the message "Auto Setting..." appears. Then the message
"AutoAdjust (or AutoColor) OK!" appears and the OSD closes.
For Cancel, the message "Setting Cancel" appears and the OSD closes.
For the other items, the message "Data Save OK!" appears and the OSD closes.
Contents of OSD menu item (The items for changing numeric value are in gray.)
Control
Contrast
HPosition*
VPosition*
HTotal (Clock)*
Phase*
ContrastRed
ContrastGreen
ContrastBlue
Backlight
AutoAdjust*
AutoColor*
Default
Save Data
Cancel
or
Increases or decreases contrast level.
Adjusts the gain of input signal together.
Adjusts the image position horizontally.
To the right (◄) ↔ To the left (►)
Adjusts the image position vertically.
Down (◄) ↔ Up (►)
Adjusts the number of pixels in the horizontal direction. If there is pixel
count mismatch between analog signal and monitor, vertical flicker and
unclear text will result.
To the left (◄) ↔ To the right (►)
Adjusts the timing of sampling so that the flicker disappears and the
text is clear.
To the right (◄) ↔ To the left (►)
Adjusts contrast of red color.
Bright (◄) ↔ Dark (►)
Adjusts contrast of green color.
Bright (◄) ↔ Dark (►)
Adjusts contrast of blue color.
Bright (◄) ↔ Dark (►)
Adjusts the display brilliance (lowest: 0, highest: 10).
: Decreases the display brilliance.
: Increases the display brilliance.
Adjusts image timing automatically.
Adjusts colors automatically.
Restores all default settings.
Saves settings and closes the OSD.
Escapes from current operation and closes the OSD.
When inputting RGB, displays page 1 (see the illustration on page 6).
instead of [◄] or [►].
Function
7