Assembly - Char-Broil Silver Smoker 12201560 Product Manual

ASSEMBLY

1
FIRST, GET A HELPER! This unit is heavy and requires a second person for lifting and moving. NEXT, pick a suitable
location to work. Open the carton and slit the corners so that the carton lays flat. This will give you a protective work surface
during assembly.
TO BEGIN ASSEMBLY, build two leg assemblies by sliding the long leg sections into the short leg sections.
Long leg section
2
Attach leg braces to the outside of one leg assembly using #10-24x1-3/4" screws and #10-24 flange nuts. Make sure
slotted (oval) hole is toward bottom of leg. DO NOT FULLY TIGHTEN screws until Step 6 is complete.
Leg brace
8
Slotted
hole
8
Leg brace
Short leg section
Do not fully tighten screws
until Step 6 is complete.